Do you remember opening up a gift on Christmas morning; that brand new Malibu Stacy Dream Car you'd asked Santa about all year? Your tiny fingers attempt to tear apart the cardboard packaging, but they just can't seem to manage to break through all of the staples, twist-ties, and tape. Finally your mother spots you and gingerly pries the shiny new toy from your hand with promise she'll be back in just a moment for you to play. But moments turn into minutes, and minutes turn into what seems like hours and days in your adolescent mind. It turns out Momma had forgot to double check if she had extra D batteries and her screwdriver was a tad too big for the tiny plastic screws. Tears began streaming down your face and you secretly vowed never again to let something that looked so cool pull you in with it's promise of simple operation.
(I should note that Bio Bubble does provide customer support by phone, unfortunately, I was not assembling my tank during those hours.)
Because the Bio Bubble can be transitioned from Aquatic to Avian to Amphibian (and just about anything else) habitat, there will be a bottom 'plug' included with your kit. You do not need this for the aquarium. Instead, remove the filter O-Ring from it's package and carefully smooth the included lube along the O-Ring. Next, insert the O-Ring into the bottom groove, on the inside of the habitat floor. Then place the pre-assembled filter on top of the hole and twist Clockwise to lock it in place.
Note: The pump included with the Bio Bubble Aquatic is a value, or basic, pump. It is small and very loud. I quickly replaced this pump with a Tetra brand Whisper Pump for about $10. You can easily attach any pump of your choosing to the set up hosing and filtration. Simply disconnect the hosing from the original pump and attach it to your new pump- you can even use the installed valve switch from above!
Keep in mind that the Bio Bubble will, ultimately, have a domed top. This may impact clearance of decorations, so assemble the tank, without water, before moving forward to ensure everything clears. We received an LED caplight from the brand, which we use on the top of our tank. It rests on the groove/opening where you will be able to feed would fish nightly. Unfortunately, the brand doesn't seem to have addressed aquatic heating as of yet. Pretty much all fish will thrive most in a stable water temperature (typically the type of fish you will fit in this habitat will need 65-75F) water. Currently the only heating solution I can find is to run a fourth cord along the side and place a heating rod in from the top.
Are you ready to see the final result of our Bio Bubble Aquarium? You'll have to tune back in on April 9, when we reveal our aquarium setup, it's inhabitants, and giveaway a Premium Bio Bubble Kit (with accessories) during Blog POP! Spring Fling!
What Daughter Says: Modern products are exciting, but they also require patience. Rely on reviews and customer support to guide you along the way.